Products
Thin Section Bearings

Silverthin SAA15XL0 1.5 in Open Type X Thin Section Bearing

Request Quote

Specifications

Bore (B) 1.500 in
Outside Diameter (D) 1.875 in
Width 3/16"
Land Diameter (L1) 1.640 in
Land Diameter (L2) 1.735 in
Approximate Weight 0.04 lbs
Separator Nylon; one piece snapover separator
Precision Class ABEC Class 1
Bearing Type 4-Point Contact (Type X)
Seals, Shields None (Open)
Unit System Inch
Nylon; one piece snapover separator
3/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 400 lbf
Dynamic Radial Load 295 lbf
Static Thrust Load 1,000 lbf
Dynamic Thrust Load 460 lbf
Static Moment Load 340 in-lbs
Dynamic Moment Load 185 in-lbs

Also Available

Open Angular Contact SAA15AG0
Open Radial Contact SAA15CL0
Sealed Radial Contact 1 JSHA15CL0
Sealed 4-Point Contact 1 JSHA15XL0
Open Duplexed (Back-to-Back) SAA15BG0
Open Duplexed (Face-to-Face) SAA15FG0
  1. Larger width than SAA to accommodate a seal

Interchange

Silverthin SAA15XLO
Kaydon KAA15XL0
Kaydon KAA15XLO
INA CSXAA015
SKF FPXB108
FAG L18PA108
NSK NBX3804
NTN KXS015
SSB RAA15XL0
RBC KAA15XL0*RBC
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close