Products
Thin Section Bearings

Silverthin SA070XP0 7 in Open Type X Thin Section Bearing

Request Quote

Specifications

Bore (B) 7.000 in
Outside Diameter (D) 7.500 in
Width 1/4"
Land Diameter (L1) 7.186 in
Land Diameter (L2) 7.314 in
Approximate Weight 0.31 lbs
Separator Brass; snapover separator
Precision Class ABEC Class 1
Bearing Type 4-Point Contact (Type X)
Seals, Shields None (Open)
Unit System Inch
Brass; snapover separator
1/8" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.025"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 2,200 lbf
Dynamic Radial Load 1,045 lbf
Static Thrust Load 5,500 lbf
Dynamic Thrust Load 1,730 lbf
Static Moment Load 7,980 in-lbs
Dynamic Moment Load 2,845 in-lbs

Also Available

Open Angular Contact SA070AR0
Open Radial Contact SA070CP0
Open Duplexed (Back-to-Back) SA070BR0
Open Duplexed (Face-to-Face) SA070FR0

Interchange

Silverthin SA070XPO
Kaydon KA070XP0
Kaydon KA070XPO
INA CSXA070
SKF FPXA700
FAG L18QA700
NSK NBX17706
NTN KXA070
SSB RA070XP0
RBC KA070XP0*RBC
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close