Products
Thin Section Bearings

Silverthin JSB055XP0 5.5 in Sealed Type X Thin Section Bearing

Request Quote

Specifications

Bore (B) 5.500 in
Outside Diameter (D) 6.125 in
Width 5/16"
Land Diameter (L1) 5.731 in
Land Diameter (L2) 5.893 in
Approximate Weight 0.41 lbs
Separator Brass; snapover separator
Precision Class ABEC Class 1
Bearing Type 4-Point Contact (Type X)
Seals, Shields Buna N Rubber Seal
Unit System Inch
Brass; snapover separator
5/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 2,360 lbf
Dynamic Radial Load 1,305 lbf
Static Thrust Load 5,890 lbf
Dynamic Thrust Load 2,100 lbf
Static Moment Load 6,850 in-lbs
Dynamic Moment Load 2,845 in-lbs
Torque Max No Load 44 in-lbs

Also Available

Open Angular Contact SB055AR0
Open Radial Contact SB055CP0
Open 4-Point Contact SB055XP0
Sealed Radial Contact JSB055CP0
Open Duplexed (Back-to-Back) SB055BR0
Open Duplexed (Face-to-Face) SB055FR0

Interchange

Silverthin JSB055XPO
Kaydon JB055XP0
Kaydon JB055XPO
INA CSXB0552RS
SKF FPXB5082RS1
FAG L18RA5082RSD
NSK NBX13907DD
NTN KXB139LL
SSB RJB055XP0
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close