Product
Thin Section Bearings

Silverthin SAA10BG0 1 in Duplex Type B Thin Section Bearing

Request Quote

Specifications

Bore (B) 1.000 in
Outside Diameter (D) 1.375 in
Width 3/16"
Land Diameter (L1) 1.140 in
Land Diameter (L3) 1.274 in
Approximate Weight 0.05 lbs
Separator Nylon; circular pocket separator
Precision Class ABEC Class 1
Bearing Type Duplexed (Back-to-Back) (Type B)
Seals, Shields None (Open)
Unit System Inch
Nylon; circular pocket separator
3/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.015"
  3. Race Width Tolerance: +0.000 -0.010"

Load Capacities

Static Radial Load 550 lbf
Dynamic Radial Load 310 lbf
Static Thrust Load 970 lbf
Dynamic Thrust Load 450 lbf
Static Moment Load 295 in-lbs
Dynamic Moment Load 170 in-lbs

Also Available

Open Angular Contact SAA10AG0
Open Radial Contact SAA10CL0
Open 4-Point Contact SAA10XL0
Sealed Radial Contact 1 JSHA10CL0
Sealed 4-Point Contact 1 JSHA10XL0
Open Duplexed (Face-to-Face) SAA10FG0
  1. Larger width than SAA to accommodate a seal

Interchange

Silverthin SAA10BGO
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close