Products
Thin Section Bearings

Silverthin SA035FR0 3.5 in Duplex Type F Thin Section Bearing

Request Quote

Specifications

Bore (B) 3.500 in
Outside Diameter (D) 4.000 in
Width 1/4"
Land Diameter (L1) 3.686 in
Land Diameter (L2) 3.814 in
Approximate Weight 0.36 lbs
Separator Brass; one piece pocket separator
Precision Class ABEC Class 1
Bearing Type Duplexed (Face-to-Face) (Type F)
Seals, Shields None (Open)
Unit System Inch
Brass; one piece pocket separator
1/8" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.025"
  3. Race Width Tolerance: +0.000 -0.010"

Load Capacities

Static Radial Load 2,120 lbf
Dynamic Radial Load 890 lbf
Static Thrust Load 3,790 lbf
Dynamic Thrust Load 1,350 lbf
Static Moment Load 2,515 in-lbs
Dynamic Moment Load 1,060 in-lbs

Also Available

Open Angular Contact SA035AR0
Open Radial Contact SA035CP0
Open 4-Point Contact SA035XP0
Sealed Radial Contact JSA035CP0
Sealed 4-Point Contact JSA035XP0
Open Duplexed (Back-to-Back) SA035BR0

Interchange

Silverthin SA035FRO
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close