Products
Thin Section Bearings

Silverthin SA050FR0 5 in Duplex Type F Thin Section Bearing

Request Quote

Specifications

Bore (B) 5.000 in
Outside Diameter (D) 5.500 in
Width 1/4"
Land Diameter (L1) 5.186 in
Land Diameter (L2) 5.314 in
Approximate Weight 0.48 lbs
Separator Brass; one piece pocket separator
Precision Class ABEC Class 1
Bearing Type Duplexed (Face-to-Face) (Type F)
Seals, Shields None (Open)
Unit System Inch
Brass; one piece pocket separator
1/8" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.025"
  3. Race Width Tolerance: +0.000 -0.010"

Load Capacities

Static Radial Load 2,990 lbf
Dynamic Radial Load 1,090 lbf
Static Thrust Load 5,310 lbf
Dynamic Thrust Load 1,690 lbf
Static Moment Load 5,115 in-lbs
Dynamic Moment Load 1,880 in-lbs

Also Available

Open Angular Contact SA050AR0
Open Radial Contact SA050CP0
Open 4-Point Contact SA050XP0
Sealed Radial Contact JSA050CP0
Sealed 4-Point Contact JSA050XP0
Open Duplexed (Back-to-Back) SA050BR0

Interchange

Silverthin SA050FRO
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close