Products
Thin Section Bearings

Silverthin SC110FR0 11 in Duplex Type F Thin Section Bearing

Request Quote

Specifications

Bore (B) 11.000 in
Outside Diameter (D) 11.750 in
Width 3/8"
Land Diameter (L1) 11.277 in
Land Diameter (L2) 11.473 in
Approximate Weight 2.32 lbs
Separator Brass; one piece pocket separator
Precision Class ABEC Class 1
Bearing Type Duplexed (Face-to-Face) (Type F)
Seals, Shields None (Open)
Unit System Inch
Brass; one piece pocket separator
3/16" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
  3. Race Width Tolerance: +0.000 -0.010"

Load Capacities

Static Radial Load 10,920 lbf
Dynamic Radial Load 3,320 lbf
Static Thrust Load 19,390 lbf
Dynamic Thrust Load 5,280 lbf
Static Moment Load 41,635 in-lbs
Dynamic Moment Load 12,660 in-lbs

Also Available

Open Angular Contact SC110AR0
Open Radial Contact SC110CP0
Open 4-Point Contact SC110XP0
Sealed Radial Contact JSU110CP0
Sealed 4-Point Contact JSU110XP0
Open Duplexed (Back-to-Back) SC110BR0

Interchange

Silverthin SC110FRO
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close