Products
Thin Section Bearings

Silverthin JSB020XP0 2 in Sealed Type X Thin Section Bearing

Request Quote

Specifications

Bore (B) 2.000 in
Outside Diameter (D) 2.625 in
Width 5/16"
Land Diameter (L1) 2.231 in
Land Diameter (L2) 2.393 in
Approximate Weight 0.16 lbs
Separator Brass; snapover separator
Precision Class ABEC Class 1
Bearing Type 4-Point Contact (Type X)
Seals, Shields Buna N Rubber Seal
Unit System Inch
Brass; snapover separator
5/32" balls
  1. Load capacities are not additive
  2. The maximum shaft or housing fillet radius that the bearing corners will clear for this series is 0.040"
  3. Race Width Tolerance: +0.000 -0.005"

Load Capacities

Static Radial Load 930 lbf
Dynamic Radial Load 760 lbf
Static Thrust Load 2,340 lbf
Dynamic Thrust Load 1,130 lbf
Static Moment Load 1,080 in-lbs
Dynamic Moment Load 660 in-lbs
Torque Max No Load 6 in-lbs

Also Available

Open Angular Contact SB020AR0
Open Radial Contact SB020CP0
Open 4-Point Contact SB020XP0
Sealed Radial Contact JSB020CP0
Open Duplexed (Back-to-Back) SB020BR0
Open Duplexed (Face-to-Face) SB020FR0

Interchange

Silverthin JSB020XPO
Kaydon JB020XP0
Kaydon JB020XPO
INA CSXB0202RS
SKF FPXB2002RS1
FAG L18RA2002RSD
NSK NBX05007DD
NTN KXB050LL
SSB RJB020XP0
datasheet

SILVERTHIN TECHNICAL DATA SHEET GENERATOR

Streamline your bearing selection process with Silverthin's easy-to-use data sheet generator, providing you with all the information you need to make an informed decision.

Request access to the datasheet is available through authorized Silverthin Distributors, or by contacting Silverthin directly.

Data Sheet Generator

close